Recording Motion JPEG Movies on a Memory Card

You can record Motion JPEG movies with the camcorder, from a tape in the

camcorder, or from devices connected via the AV terminal (analog line-in) or the E DV terminal.

Cautions:

•When you are using an SD Memory Card, make sure the protect switch is set to allow recording.

•While the card access indicator flashes, do not turn off the camcorder, disconnect the power source or remove the memory card. Doing so could result in data damage.

•Do not load/unload a tape during recording. Sound will not be recording during this operation.

Notes:

•Make sure a memory card with enough memory available is inserted into the camcorder.

•The sound of a movie recorded on a memory card will be monaural.

Recording with the Camcorder

CARD + CAMERA

1.Turn the camcorder’s POWER switch to CAMERA and move the TAPE/CARD switch to CARD.

2.Press the start/stop button.

•You can record up to 10 seconds in 320 ⋅ 240 and 30 seconds in 160 ⋅ 120.

•Press the start/stop button to end recording.

•The camcorder starts to write the movie to the memory card when recording is finished.

Note:

•For using the self-timer ( 71), set the self-timer before step 2, and then press the start/stop button.

Card Memory a Using

111