Appears immediately
Eafter you start recording, and the video heads are badly contaminated. Make sure to clean the video heads when this caution appears.
( 
149)
HEADS DIRTY,
USE CLEANING CASSETTE
Appears if you have tried to mark 201 or more images for printing, or if a mark file cannot be edited.
( 
119)
No memory card is inserted in the camcorder.
PRINT MARK ERROR
NO CARD
Memory card caution phrases
An error has occurred with the memory card.
The camcorder cannot CARD ERROR record or play back. A
temporary card error is also possible. If
CARD ERROR disappears after 4 seconds
and 
flashes red, turn the camcorder’s power off and back on again, and remove
and reinsert the card. If 
flashes green, recording or playing back is possible.
There is no more remaining memory
on the memory card. CARD FULL Change the card or
erase images.
You have reached the maximum file or folder number.
( 
101)
There are no images recorded on the memory card.
You are using an SD Memory Card and it is set for erasure pre- vention. Change the position of the protect switch.
Depending on the signal, some analog images cannot be recorded on the memory card as still image.
NO IMAGES
THE CARD IS SET FOR ERASURE PREVENTION
THIS IMAGE CANNOT BE RECORDED
( 104)
NAMING ERROR
Disconnect the USB cable, erase still images/movies until the memory card
TOO MANY IMAGES DISCONNECT USB CABLE
| The image has been |
| |
| recorded in an | UNIDENTIFIABLE | |
Additional Information | incompatible JPEG | ||
IMAGE | |||
play back, or the | |||
| format or other |
| |
| format that the |
| |
| camcorder cannot |
| |
| image data has been |
| |
| damaged. |
|
contains less than 900 images and reconnect the USB cable.
164