Setting the data code
E
You can also choose to display camcorder data (shutter speed and exposure settings) in the data code.
+PLAY
TAPE (VCR)
DISP.SET UP | DATA CODE•••DATE/TIME |
( | 39) |
To change, open the menu and select DISP.SET UP. Then select DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu.
Possible data code combinations for tapes:
DATA CODE |
|
| Date/Time & | |
(tape only) | Date/Time | Camera data | ||
D/TIME SEL. | Camera data | |||
|
| |||
Date |
|
| F1.8 | |
| F1.8 | 1/250 | ||
| JAN. 1,2003 | 1/250 | JAN. 1,2003 | |
Time |
| F1.8 | F1.8 | |
12:00:00 PM | 1/250 | |||
| 1/250 | 12:00:00 PM | ||
|
|
| F1.8 | |
Date & Time | 12:00 PM |
| 1/250 | |
F1.8 | 12:00 PM | |||
| JAN. 1,2003 | 1/250 | JAN. 1,2003 |
Notes:
•The data code will read “– –
–During playback of a blank section of tape.
–If the tape was recorded before entering the date and time in the camcorder’s memory.
–If the tape was recorded on a camcorder without a data code function.
–If noise or tape damage prevents the data code from being read.
•If a recording made on ELURA50 is played back on a different DV camcorder, the data code may not be displayed correctly.
•The data code will appear in the display even if DISPLAYS ( 
159) has been set to OFF through the menu.
Full the Using Features of Range
81