4. Hood
The lens hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust.
Fit the hood to the hood mount, then turn it in the direction of the arrow to attach it securely ❻ .
The hood can be reverse-mounted on the lens for storage ❼.
•Part of the picture may be blocked if the hood is not attached properly.
•When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it.
5. Filters
You can attach filters to the filter mounting thread on the front of the lens.
•Only one filter may be attached.
•Use a polarizing Canon filter.
nThe lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm to include the
nThe size and weight listed are for the lens only, except as indicated.
nAperture settings are specified on the camera. The camera automatically compensates for variations in the aperture setting when the camera is zoomed in or out.
nAll data listed is measured according to Canon standards.
nProduct specifications and appearance are subject to change without notice.
nCase and hood not provided with some models.
nFilters sold separately.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian
❻●
❼●
Specifications
|
| Angle of view |
| Lens | Minimum | Max. magnification and field of view | Min. focusing | Filter diameter | Max. diameter | Weight | Hood | Case | |
| Diagonal | Vertical | Horizontal | construction | aperture | distance | and length | ||||||
|
|
|
|
|
| ||||||||
80 mm:0.07X/368 × 548 mm (14.5”×21.6”) | 1.5 m/4.92 ft | 52 mm | 69 × 78.5 mm | 250 g/8.8 oz | LP1014 | ||||||||
200 mm:0.16X/152 × 225 mm (6”×8.9”) | (2.7”×3.1”) | ||||||||||||
|
|
|
|
|
|
|
|
|
|
| |||
75 mm:0.07X/371 × 555 mm (14.6”×21.9”) | 1.5 m/4.92 ft | 58 mm | 73.8 × 122 mm | 500 g/17.6 oz | LP1019 | ||||||||
|
|
|
|
|
| 300 mm:0.25X/96 × 142 mm (3.8”×5.6”) |
|
| (2.9”×4.8”) |
|
|
| |
75 mm:0.07X/372 × 558 mm (14.6”×22”) | 1.5 m/4.92 ft | 58 mm | 71 × 122 mm | 480 g/16.8 oz | LP1019 | ||||||||
300 mm:0.25X/95 × 142 mm (3.7”×5.6”) | (2.8”×4.8”) | ||||||||||||
|
|
|
|
|
|
|
|
|
|
| |||
90 mm:0.08X/311 × 464 mm (12.2”×19.4”) | 1.5 m/4.92 ft | 58 mm | 71 × 114.7 mm | 420 g/14.8 oz | LP1019 | ||||||||
|
|
|
|
|
| 300 mm:0.25X/95 × 141 mm (3.7”×5.6”) |
|
| (2.8”×4.5”) |
|
|
|
| 1208SZ | © CANON INC. 2006 |