2. Use the buttons (A) to select the WLAN setup icon.

3. Press the OK button (B).

The (blue) Wi-Fi lamp (C) lights up when wireless connection is enabled.

cSetup Procedure Selection

The printer will automatically search for access points supporting WPS. * If the Push Button Method screen is displayed on the printer

When you are unsure if your access point or router supports this technology, press the Stop button. Proceed to the screen for Standard setup.

Push Button Method → d-ASelect the most suitable connection method from the following.

•Standard setup → d-B

Connect to Access Point by entering the Network Password

•WPS → d-C

Connect to WPS-compatible Access Point

•Other setup (Advanced setup) → d-D

Connecting to the Network by Entering the Access Point's Settings Directly on the Printer

When using WEP key number 2, 3 or 4, select "Advanced setup".