Playback
Playing Back Clips
You can play back clips from the MXF clip index screen,
[$Mark] index screen, [%Mark] index screen and [MP4] index screen. Use the playback control buttons on the camcorder or use the joystick and joystick guide. You can also use the supplied wireless controller.
1 In the index screen, move the orange selection frame to the clip you want to play back.
2 Press the Òbutton to start playback.
• Playback will start from the clip selected and continue until the end of the last clip in the index screen. When the last frame of the last clip is reached, playback will be paused.
•Press the Òbutton again or press SET to pause/resume the playback.
•Press the Ñbutton to stop the playback and return to the index screen.
IMPORTANT
•Observe the following precautions while any access indicators are illuminated or flashing in red. Failure to do so may result in permanent data loss.
-Do not disconnect the power source or turn off the camcorder.
-Do not open the CF card slot cover or the SD card slot cover of the recording media being accessed and do not remove the recording media.
NOTES
• You may notice brief stops in video or audio playback between clips.
147
English