2-16 Paper Handling Chapter 2
Using Canon’s Specialty Papers
This section provides guidelines for printing on Canon’s specialty papers and
describes special procedures required for high resolution paper, fabric sheets, and
banner paper.
Specialty Paper Guidelines
Follow these guidelines:
❑When feeding transparencies, remove each sheet after it is delivered, being
careful not to touch the document tray. Do not allow transparency sheets to
stack up in the output tray. (Should you dirty the document tray when
removing the sheets, wipe the document tray clean with a clean, soft, lint-free
cloth moistened with water or diluted dishwashing detergent solution.)
❑Let the printed sheets of transparency or paper dry completely before storing
them.
❑When your output has dried completely, cover its printed side with a sheet of
plain (not coated) paper before storing it; this is recommended even if you
place the sheets of film in a clear file or plastic holder.
Be sure to read any instructions that come with your Canon specialty paper.
These instructions provide important information regarding how to achieve the
highest print quality with these papers.
n
Paper Type Drying Time
Canon High Gloss Film 10 minutes
Canon Glossy Photo Paper 10 minutes
Canon Transparencies 15 minutes