Easy Connection via WPS (PIN Mode)

This is a connection mode available when using an access point compatible with Wi-Fi Protected Setup (WPS). In the PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set at the access point to establish a connection. Even if there are multiple access points active in the surrounding area, a relatively reliable connection can be established using a shared identification number.

It may take about one minute to establish a connection.

If stealth functions of the access point are enabled, connection may be disabled. Deactivate stealth functions.

1

2

3

Select [Wi-Fi function].

Under the [53] tab, set [Wi-Fi] to [Enable], then select [Wi-Fi function].

Select [w].

Select [w] (Upload to Web service) and press <0>.

Select a Web service.

Select a Web service to connect to and press <0>.

The contents and ordering of the list of items displayed will vary depending on settings.

The Web service to connect to can be changed later (p.126).

When [ ] (Email) is selected, a list of registered addresses is displayed (p.125).

111