Manual Connection by Searching Networks

(1) (2) (3) (4)

5 Select an access point.

 

 

 

 

 

Press <0> to enable the selection of

 

 

 

 

 

an access point.

 

 

 

 

 

 

 

 

 

 

Press the <V> key to select an

 

 

 

 

 

access point, then press <0>.

 

 

 

 

 

Select [OK] and press <0> to go to

 

 

 

 

 

the next screen.

(1)Indicates whether the device is in infrastructure or ad hoc mode

(2)An icon is displayed if the access point is encrypted

(3)First nine characters of the SSID

(4)Channel used

Access point encryption

This camera supports the following options for [Authentication] and [Encryption settings]. Therefore, the encryption used by the access point should be one of the following.

[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-

PSK

[Encryption settings]: WEP, TKIP, and AES

[Enter connection] and [Search again]

To configure settings for the access point manually, select [Enter connection] and press <0>. Follow the procedures displayed to complete the settings.

To search for access points again, select [Search again] and press <0>.

68