Using Infrastructure Mode to Establish a Connection 
These instructions are continued from Chapter 5.
To connect in camera access point mode, see “Using Camera Access Point Mode to Establish a Connection” (p.46).
1Select the printer to connect to.
When a list of detected printers is displayed, select the printer to connect to and press <0>.
XSome printers may make a beeping sound.
When 16 or more printers are detected or search takes over 3 minutes, you can select [Search again].
2 Perform further settings.
To finish settings in this stage, press the <V> key to select [OK], then press <0> to go to step 3.
To change the name of the settings, select [Settings name] and press <0>.
XThe virtual keyboard is displayed (p.14). Up to 30 characters can be entered for a settings name.
88