Configuring EOS Utility Communication Settings
2Start the pairing software.
Normally, it is installed in the same
location as EOS Utility.
XAfter the pairing software starts up, an icon is displayed on the task bar.
XWhen the camera is detected, a message is displayed.
3Doubleicon.
XDetected cameras are listed. Cameras that have already been connected are not included in the list.
Click [Connect].
If multiple cameras are displayed, identify the camera to connect to by its MAC address displayed on the camera’s LCD monitor.
The MAC address can also be checked on the [General sett.] screen (p.149).
95