Note
If the OK button is pressed, the screen to change the number of copies will appear.
See (3) of step 3 in Printing Photos Saved on the Memory Card / USB Flash Drive.
If appears at the upper left of the photo, it may not have been scanned properly. Press
the left Function button to select Rescan. Confirm the message, and repeat the
procedures from step 2 to scan the photo again.
Press the center Function button to display the trimming screen, and crop photos.
See Cropping Photos.
(4) Repeat the procedures of (2) and (3) to specify the number of copies for each
photo.
(5) Confirm the number of sheets to be used for printing the selected photos.
4. Start printing.
(1) Press the right Function button to select Print settings, and confirm the page
size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for
Type.
To change the settings, use the or button (Scroll Wheel) to select the item to change, and use the
or button to select an option.
See Changing the Settings.
Note
If Manual correction is selected for Photo fix on the Print settings screen, press the right
Function button to select Advanced, and correct a photo manually.
See Using Various Functions .
The settings of the page size, media type, print quality, etc. are retained, and these
settings will appear next time when Photo reprint is selected even if the power is turned
off and on.
(2) Press the Color button to print in color, or the Black button to print in black &
white.
The machine starts printing.
Remove the photos on the Platen Glass after printing is completed.
Note
Press the Stop button to cancel printing.
You can exit Photo reprint and display the HOME screen, if you press the HOME button after
printing is completed.
Page top
Page 41 of 1037 pagesReprinting Printed Photos