(19) Ink lamps
Light or flash red to indicate the ink tank status.
See Checking the Ink Status.
(20) Print Head Holder
Install the Print Head.
(21) Print Head Lock Lever
Locks the Print Head into place.
Important
Do not raise this lever after installing the Print Head.
(22) Scanning Unit (Cover)
Scans originals. Open it to replace ink tanks, to check ink lamps, or to remove jammed paper inside the
machine. When opening the Scanning Unit (Cover), lift it with the Document Cover closed.
(23) Access lamp
Lights or flashes to indicate the memory card status.
See Inserting the Memory Card.
(24) Card Slot
Insert a memory card.
See Inserting the Memory Card.
(25) Card Slot Cover
Open to insert a memory card.
See Inserting the Memory Card.
(26) Inner Cover
Close it when printing on paper.
Note
For details on installing the Print Head and ink tanks, refer to the printed manual: Getting
Started.
Operation Panel
Page 7 of 1037 pagesMain Components