Advanced Guide Troubleshooting
Contents > Overview of the Machine > LED Display and Basic Operations
LED Display and Basic Operations
You can use the machine to make copies or print out without a computer.
This section describes the LED display and basic operations on the Operation Panel.
The number 1 appears on the LED normally when turning on the power.
The LED display indicates the machine status as follows.
Machine Status LED Display
While copying Number of copies (flashing)
While printing, scanning, or
performing maintenance
operations (flashing in order)
When an error occurs E and number appear alternately.
For details on the error codes, refer to the "Troubleshooting " in the on
-screen manual:
A
dvanced Guide.
P and number appear alternately.
A
n error that requires contacting your Canon service representative
may have occurred. For details, refer to the "Troubleshooting" in the
on-screen manual:
A
dvanced Guide.
While the Scanning Unit
(Cover) is open
(flashing)
Note
When a PictBridge compliant device such as a digital camera is connected to the machine, C
appears on the LED (MP240 series).
Number of Copies
When copying starts, the specified number of copies appears on the LED. While copying is in progress,
the number on the LED is flashing and reduced by one to indicate the remaining number of copies to be
made.
Each time you press the [+] button, the number on the LED increases by one. When F appears, the
number of copies is set to "20". Press the [+] button again to return to "1".
Page 9 of 628 pagesLED Display and Basic Operations