point and the machine.
The Machine Cannot Be Detected in the Network
Check 1: Make sure that the machine is turned on.
Check 2: Make sure that the USB cable is connected properly.
Refer to the setup manual of the machine to connect the USB cable pro perly.
Check 3: Make sure that the machine setup is completed.
If not, refer to your setup manual of the machine to complete the ma chine setup.
Check 4: When using wired LAN, make sure that the LAN cable is connected
properly.
Check 5: When using Canon IJ Network Tool, click Update to search for the
printer again.
Canon IJ Network Tool Dialog Box
Check 6: When searching for a printer over a network, make sure that the
machine is associated with the port driver.
When No Driver is displayed under Name in the Canon IJ Network Tool, there is no
association. Select Associate Port on the Settings menu, then as sociate the port with the
printer.
Canon IJ Network Tool Menus
Check 7: When using wireless LAN, make sure that the network settings in the
printer are identical with those of the access point.
Refer to the manual provided with the access point or contact its manufa cturer to check the
access point settings, and then modify the machine settings.
How to Set a WEP/WPA/WPA2 Key
Check 8: When using wireless LAN, make sure that there is no obstruction.
Wireless communication between different rooms or floors is generally poor. Adjust the
location of the devices.
Check 9: When using wireless LAN, make sure that the machine is not place as
far away from the access point.
The access point is located indoors within the effective range for wireless communication.
Locate the machine within 50 m from the access point.
Check 10: When using wireless LAN, make sure that there is no source of radio
wave interference in your vicinity.
There may be a device such as a microwave oven using the same frequency bandwidth as
the wireless station. Place the wireless devices as far away from the interference source as
possible.
Check 11: Make sure that the network settings of the computer are correct.
Make sure that the computer can communicate with the printer and the acce ss point over the
wireless LAN.
Check 12: Make sure that Enable bidirectional support is selected in the Ports
sheet of the properties dialog box of the printer driver.
Opening the Printer Properties Dialog Box (Windows)
Check 13: Make sure that the firewall of the security software is disabled.
If the firewall function of your security software is turned on, a message may appea r warning
that Canon software is attempting to access the network. If the warning message appears,
Page 959 of 988 pagesCannot Communicate With the Machine/Cannot Print from the Machine