9-4 Special Features Chapter 9
Switching Temporarily to Tone Dialling
Many information services for banks, airline reservations, hotel reservations, etc.,
require tone dialling for their services. If your MultiPASS is connected to a rotary pulse
line, follow this procedure to set the unit temporarily for tone dialling:
1Open the document tray.
2Press Hook.
Instead of pressing Hook, you can also lift the
handset if you have connected the optional
handset or a telephone to your unit.
3Use the numeric buttons to dial the Ex:
telephone number of the information
service.
The unit connects using the pulses required by
your telephone line.
4When the recorded message of the
information service answers, press
Function.
5Press Tone/+ to switch to tone dialling. Ex:
When Tone/+ is pressed, Tis displayed in the
LCD.
If you pressed Hook in step 1, you can pick
up the handset if you need to talk to the other
party.
6Use the numeric buttons to enter the Ex:
numbers requested by the information
service.
Numbers entered after pressing Tone/+ will be
dialled using tone dialling.
7When you have finished, press Hook to
disconnect the call.
If you used the handset, hang up to
disconnect the call.
Tone dialling is cancelled when you disconnect
the call.
TEL=7654321TA34
TEL= 7654321T
TEL= 7654321
TEL=