Chapter 2 Setting Up 2-5
Setting Up
Assembling the MultiPASS
Follow this procedure to assemble your MultiPASS:
n•To see how the MultiPASS looks fully assembled, 1p. 2-10.
•For details on attaching the optional handset to your MultiPASS, 1Appendix B.
3The MultiPASS comes
with the document
tray already attached.
However, if you
accidentally remove
the tray, attach it by
fitting the slots on the
tray into the tabs on
the unit.
2Hook the tab on the
output tray to the
opening on the
MultiPASS.
1Hold the document
support so that it
curves towards the
back of the unit and
fit the tabs of the
support into the
slots above the ADF.