Chapter 2 Setting Up 2-19
Setting Up
Loading Paper in the Multi-Purpose Tray
Follow this procedure to load paper in the multi-purpose tray:
1Make sure the paper thickness lever is
set to p(up).
•For details, 1p. 5-6.
cDo not set the paper thickness lever
while the unit is printing since this
will cause problems.
2Raise the paper rest until it stops q,
then move the paper guide to the left to
match the size of your paper w.
3Prepare a stack of paper by fanning
the edge that will feed into the unit first,
and then by tapping the stack on a flat
surface to even its edges.
4Insert the stack into the multi-purpose
tray q, and align the right edge of the
stack with the right side of the multi-
purpose tray. Slide the paper guide
snugly against the left edge of the
stack w.
•The multi-purpose tray holds up to 100
sheets of 75 g/m2plain paper.
•Make sure the stack does not exceed the
paper limit mark (P).
The MultiPASS is now ready to print.
2
1
PAPER LIMIT MARK
21