6-8 Speed Dialling Chapter 6
Using Coded Speed Dialling
To use this feature, you must first register a number for coded speed dialling.
(1p. 6-6)
Follow this procedure to send documents using coded speed dialling:
1Open the document tray.
2Adjust the document feed lever for the
document you are loading. (1p. 4-2)
3Prepare the document and load it, face
down, in the ADF. (1p. 4-4)
• For colour sending, press Colour/B&W to (Currently used memory)
turn its light. (1p. 7-2)
• To adjust the resolution and contrast,
1pp. 7-3, 7-4. (Standby to scan)
4Press Coded Dial.
5Use the numeric buttons to enter the two-digit Ex:
code assigned to the number you wish to fax.
• The number registered under that coded Ex:
speed dialling code is displayed.
• If you enter the wrong code, press Stop. Then
press Coded Dial and enter the correct code.
•NO TEL # appears if no fax number is
assigned to the coded speed dialling code you
entered.
6Press Start to begin scanning for sending,
or wait a few seconds for the MultiPASS to
begin scanning automatically.
• If you prefer the MultiPASS never to scan a
document automatically after a few seconds,
disable the TIME OUT setting. (1p. 14-6)
n• You can also use coded speed dialling to send a document to more than one destination
at a time. (1p. 7-13)
• To dial a telephone number registered for coded speed dialling, simply lift the handset,
press Coded Dial, and enter the two-digit code.
TEL=03 3758 2111
A01
A
DOCUMENT READY
MEMORY USED 0%