Advanced Guide Troubleshooting
Contents > Faxing > Sending Faxes
Sending Faxes
This section describes dialing and sending faxes directly using the Numeric buttons.
For details on other ways to send faxes, see Using Various Sending Functions.
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
A
djusting the Sending Quality
Note
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching systems, you have to dial the outside line
access number first, and then the number of the party you are calling.
Sending a Fax with the Numeric Buttons
1. Preparing for sending a fax.
(1) Make sure that the power is turned on.
See Operation Panel.
(2) Load a document on the Platen Glass or in the ADF.
See Loading Originals.
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on the types and conditions of documents which you can fax, see Originals
You Can Load.
(3) Press the FAX button.
The fax standby screen will appear.
(4) Adjust the density (scan contrast) or image quality (fax resolution) as necessary.
See
A
djusting the Sending Quality.
2. Sending the fax.
When the document was loaded on the Platen Glass:
(1) Use the Numeric buttons to dial the recipient's number.
(2) Press the Color button for color sending, or the Black button for black & white
sending.
Important
Color sending requires that the recipient's fax machine supports color faxing.
(
3
)
Press the OK button.
Page 59 of 817 pagesSending Faxes