Shooting in the Color Accent Mode
Colors other than the color specified in the LCD monitor are shot in black and white.
1In the FUNC. menu, select 
.
•See Shooting in a My Colors Mode (p. 102).
•All colors but the previously specified one display in black and white.
2Press the MENU button.
The camera will switch to color input mode and the display will alternate between the original image and the color accent image.
3Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press
the 
button.
•Only one color can be specified.
•You can use the 
or 
button to change the color that is retained.
•You can shoot immediately after this step. The screen will reappear after the shot allowing you to change the settings and shoot again.
4Press the MENU button.
Shooting
The color input mode will no longer be in effect.
5Press the FUNC./SET button.
The display will return to the shooting screen.
•The default color accent is green.
•You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings.
•The chosen Color Accent is retained even if the camera's power is
turned off. | 105 |
|