(A) IF YOU HAVE A CF CARD READER, PC CARD READER* OR NOTEBOOK TYPE PC* WITH
A PC CARD SLOT
1. Insert the formatted CF card into the card reader.
2. Copy the "IXY200.FIR" file from the downloaded data to the CF card.
* If you use a PC card reader or a notebook type PC with a PC card slot, a CF-
to-PC card adapter is required.
(B) IF YOU DO NOT HAVE ANY OF THE ABOVE CARD READING DEVICES
1. Insert the CF card into the DIGITAL IXUS v/ PowerShot S110, and connect it to the PC with an
USB cable.
2. Double-click the " " in the "ELIX110v_FirmUpdate1002" folder, and follow
the instructions so that the "IXY200.FIR" file can be copied onto the CF card in the DIGITAL IXUS
v/ PowerShot S110*.
UploadFirmware
*The Main Dial of the DIGITAL IXUS v/ PowerShot S110 should be set to
(Replay) mode while the PC is connected.
When you attempt to transfer the data to the CF card in the DIGITAL IXUS v/
PowerShot S110 with the "UploadFirmware", do not open the CF card slot cover,
turn the Main Dial or turn the power off until the data transfer is completed.
Any of the above operations during data transfer will disable the firmware
update.