Preparing the Camera
Charging the Battery Pack
Use the following procedures to charge the battery pack the first time you use the camera or when the “Change the battery pack” message displays.
1 | Insert the battery pack into the | |
| battery charger. | |
| Align the battery pack according to the | |
| arrows on the battery and the charger. | |
| Insert the battery securely. | |
| Battery charger model names and types | |
2 vary by region | ||
| (For | |
| Plug the battery charger into a | |
| power outlet. | |
Charge Indicator | (For | |
Attach the power cord to the battery | ||
| ||
| charger and plug it into a power outlet. | |
| • The charge indicator will light orange | |
| while the battery pack is charging. It will | |
| change to green when the charge is | |
| complete. | |
| • After charging, unplug the battery charger | |
| and remove the battery pack. | |
Camera the Preparing
To protect the battery pack and prolong its life, do not charge it for longer than 24 hours continuously.
•Since this is a lithium ion battery pack, you need not completely discharge it before recharging. It can be recharged at any point.
•It takes approximately 95 minutes to fully charge the battery pack from a fully discharged state (based on Canon’s testing standard). Charging it within a temperature range of 5° to 40 °C (41° to 104 °F) is recommended.
•Charge times may vary according to the ambient temperature and the battery pack’s charge state.
•See Battery Capacity (p. 175).
• You may hear a noise during charging. This is not a malfunction. | 21 |
|