
Reviewing an Image Right after Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2 seconds even if you release the shutter button regardless of whether the LCD monitor is on or off.
You can also review it with the following procedures.
•By keeping the shutter button pressed after a shot.
•By pressing the SET button while the image is displayed on the LCD monitor.
Press the shutter button halfway to stop displaying it so that you can shoot the next frame.
You can do the following while the image is displayed.
- Check the image brightness in the histogram (p. 39).
-Erase the image (p. 113).
-Magnify the image in the display (p. 94).
Changing the Review Duration
The default review time is 2 seconds. The review function can be set to [Off] or changed to any time in the range of 2 to 10 seconds in
1 In the
(Rec.) menu, select 
.
See Selecting Menus and Settings (p. 44).
2 Use the 
button to select review setting and press the MENU button.
•With the [Off] option, the image will not automatically display.
•In the [2 sec.] to [10 sec.] range, the image will continue to display for the specified time even if the shutter button is released.
•Holding the shutter button down after a shot holds the image in the display regardless of the setting.
60