Paper Cassette Preparations

The following procedures instruct you how to set paper in the cassette and install it in the printer.

Setting Paper in the Paper Cassette

1 Confirm that you have the correct size of paper cassette.

Prepare the correct size of paper cassette for the sheets you are using.

Size Notation

2 Open the lid of the paper cassette.

Push back a little before lifting upward.

Use the following procedures to open paper cassettes with two lids.

Outer Lid

Inner Lid

Push back a little before lifting upward.

3 After lightly fanning the paper, set it in the cassette with the shiny side up.

Remove the protective sheet from the paper. Be careful not to touch the shiny side of the paper.

Orient the address

 

 

portion on the

 

 

postcards towards

 

 

the back of the

 

 

paper cassette.

POSTCARD SIZE

CARD SIZE

 

Align the paper

 

 

 

beneath the tabs.

 

Shiny Side

 

 

 

L Size

WIDE

Align the paper beneath the tabs.

4 Close the lid.

As the illustration shows, the lid should overhang the end slightly.

On cassettes with two lids, close only the inner lid before inserting the cassette fully into the slot until it clicks into place.