Trimming Settings (CP730 Only)
This feature prints a select portion of an image.
The trimming feature can only be used in the (Single) mode.
1 Press the TRIM. button.
The image will display at full size on the LCD monitor.
2 Press the DISP. button.
The display will switch into a mode allowing you to set the print area size and orientation.
3 Press the and buttons to adjust the size of the print area.
Press the and buttons to rotate the frame 90 degrees.
4 Press the DISP. button.
The display will switch back into the mode for setting the frame position.
5 Press the , , and buttons to shift the print area as desired.
6 When you finish the adjustments, press the TRIM. button.
This concludes the trimming settings.
•To cancel the trimming setting, press the button until the print area frame disappears when you have the display in the mode for setting the print area size and orientation.
•The trimming setting is reset when the print is completed.