Charging the Battery

Use the following procedures to charge the battery.

1 Attach the battery to the printer.

2 Connect the power cord to the compact power adapter and plug it in a power outlet. Connect the compact power adapter connector to the printer.

To a power outlet

While the battery is charging, the power button will light orange and go out when the battery is charged. The battery will cease charging if you turn on the printer during the process. When you turn the printer off again, it will resume charging.

3 After the battery is charged, detach the connector of the compact power adapter from the printer.

The battery is now ready to power the printer.

The printer will automatically turn off when powered by the battery if the printer is not used for five minutes or more.

Remaining Battery Charge

The printer power button will begin to blink orange when the battery charge is low. In addition, a message may appear on a connected camera’s LCD monitor or the printer’s LCD monitor. Recharge the battery or exchange it for a fully charged one.