Preparations
24

1Slide in the

direction of the arrow and hold it

pressed down.

2 Slide the battery pack down and

then pull it out.

IMPORTANT
• Turn off the camcorder before
connecting or disconnecting the
compact power adapter. After pressing
to turn off the camcorder,
important data is updated on the hard
disk. Be sure to wait until the
indicator turns off.
• We recommend charging the batte ry
pack in temperatures between 10°C
and 30°C (50 °F and 86 °F). Outside the
temperature range of 0°C to 40°C
(32°F to 104 °F), charging will not start.
• Do not connect to the camcorder’s DC
IN terminal or to the compact power
adapter any electrical equipment that is
not expressly recommended for use
with this camcorder.
• To prevent equipment breakdowns and
excessive heating, do not connect the
supplied compact power adapter to
voltage converters for overseas travels
or special power sources such as those
on aircraft and ships, DC-AC inverters,
etc.
NOTES
• The battery pack will be charged only
when the camcorder is off.
• If remaining battery time is an issue, you
can power the camcorder using the
compact power adapter so the battery
pack will not be consumed.
• Charged battery packs continue to
discharge naturally. Therefore, charge
them on the day of use, or the day
before, to ensure a full charge.
• We recommend that you prepare batte ry
packs to last 2 to 3 times longer than
you think you might need.
USA and Canada only: The
Lithium ion/polymer
battery that powers this
product is recyclable.
Please call
1-800-8-BATTERY for
information on how to recycle this
battery.
Preparing the Wireless Controller and Accessories

First, insert the supplied lithium button

battery CR2025 into the wireless

controller.

TO REMOVE THE BATTERY PACK
BATTERY RELEASE
switch
BATTERY RELEASE
ON/OFF
Tab