1- 21
Function Menus
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
Far End RollMrgn 10mm, 5mm Sets the amount of white space to ensure
the quality of printing at the trailing edge.
Important
zIf set to 5 mm, the print quality at the
leading edge, or the accuracy of feeding,
may deteriorate, or the surface of the print
may be scratched. Also, ink may stick to
the leading edge.
Media Thickness Thick, Standard, Thin Selects the ideal thickness for the media
type. The printhead alert will display based
on the value of this setting.
VacuumStrngth Weak, Standard, Strong, Strongest Sets the amount of suction on the media on
the platen.
Standard Cutter Enable, Disable Determines whether the standard, flat blade
cutter is enabled.
Cut speed Standard, Fast Sets the speed of the cutter cutting the
media. Selecting Fast for film and other
media that easily generates cutting dust will
reduce the amount of dust.
CutDustReduct Off*, On When printing on film or other media that
creates a large amount of dust during
cutting, a line is printed at cutting position to
reduce the amount of scattered dust.
Correct Smear Off*, On Select for media when the printing results is
easily scratched.
Menu Item Setting Values Function