1- 58
Specifications
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
• These specifications are subject to change for improvements.
• The above specifications may vary for different operating environments.
Noise (Operation) Approximately 50 dB (A) or less (less than 6.5 Bels)
Ideal operating environment
15 ~ 30 °C (59 ~ 86 °F), 10 ~ 80 % RH with no condensation
Operating Environment 5 ~ 35 °C (41~ 95 °F), 10~90 % RH with no condensation
Dimensions (w x d x h)
Printer only 1,200 mm x 569 mm x 484 mm (47.3 in x 22.4 in x 19.1 in)
Printer + Stand 1,200 mm x 752 mm x 1,097 mm (47.3 in x 29.6 in x 43.2 in)
Weight (including printhead, ink tanks)
Printer only Approximately 40kg
Printer + Stand Approximately 49kg
*1.The following environment is required to use the High Speed mode of USB 2.0.
•Computer: A computer that supports USB 2.0 High Speed mode.
•OS: Windows Server 2003, Windows XP, or Windows 2000, or MacOS X Ver. 10.3.3 or later.
•USB 2.0 Driver: Microsoft USB 2.0 driver (you can obtain the Microsoft USB 2.0 driver from the Windows Update or
Service Pack).
•USB Cable: A USB cable certified for USB 2.0.
•Canon approved USB 2.0 interfaces (USB drivers confirmed for use with Microsoft operating systems):
•Adaptec USB 2.0 expansion card USB2CONNECT3100
•Adaptec USB 2.0 expansion card USB2CONNECT5100
•Adaptec USB 2.0 expansion card USB2CONNECT2000L
•Intel 845G chip set
•SiS SiS740 chip set
If you have any questions about a chip set listed above, please contact the manufacturer.
*2.One card can be installed, either the network interface board or the IEEE1394 board.
*3.Either Photo Black Ink or Matte Black Ink can be installed.
*4.Use the RIP software application (sold separately) to print on Newsprint for Proofing.
*5.Cannot use the Borderless S ize or Oversize items to print on some media types and sizes.
*6.W ith Oversize selected, load roll media larger than the selected Media Size: roll media 10 mm wider and 10 mm taller,
a cut sheet 10 mm wider and 20 mm taller.
*7.This may differ with some optional boards installed.
*8.The printer consumes a small amount of electrical power, even while it is switched off. Unplug the printer from its pow-
er source to cut off power consumption completely.
W6400