Protecting Still images
You can protect important still images from accidental erasure when displaying a single image or the index screen.
If a memory card is initialized, all still images, even protected ones, will be erased permanently.
Protecting a Single Still Image
1.Select the still image you wish to protect.
2.Press the SELECT/SET dial to open the still image operations menu.
In 
mode, the menu appears when you press the dial while you are reviewing a still image, or immediately after recording a still image.
3.Select [ 
PROTECT].
4.Select [ON].
To remove the protection select [OFF] instead.
5.Select [
CLOSE] to close the menu.
appears and now the image cannot be erased.
Protecting Still Images from the Index Screen
MENU
( 
27)
CARD OPERATIONS
PROTECT
1. Move the zoom lever toward W.
Up to 6 still images appear.
2.Open the menu and select [CARD OPERATIONS]. Select [ 
PROTECT] and press the SELECT/SET dial.
3.Select the image you wish to protect and press the dial.
•
appears on the image.
•Select additional images with the SELECT/SET dial and protect them in the same way.
4.Close the menu to return to the index screen.
