xii Introduction

Organization

This manual is organized as follows:

Chapter 1 illustrates the supported network configurations and shows the network connectors on the ColorPASS.

Chapter 2 describes how to prepare for ColorPASS Setup, including planning system security through access levels.

Chapter 3 describes ColorPASS configuration (Setup) from the Control Panel.

Chapter 4 describes ColorPASS Setup from a Windows computer.

Chapter 5 provides guidelines for setting up Windows network servers and UNIX systems for printing to the ColorPASS and for using the Fiery WebTools.

Chapter 6 summarizes some administrative features of ColorPASS software that are available for IPX/SPX, TCP/IP, and AppleTalk networks, and also offers some troubleshooting hints.

Appendix A describes the Token Ring option.

NOTE: Administrator features described in other manuals are summarized on page 6-1.

About the documentation

This manual is part of a set of ColorPASS documentation, which includes the following manuals for users and system administrators:

The Configuration Guide explains basic configuration and administration of the ColorPASS for the supported platforms and network environments. It also includes guidelines for setting up UNIX, Windows NT 4.0, and Novell NetWare servers to provide printing services to clients.

Getting Started describes how to install software to enable users to print to the ColorPASS. Specifically, it describes installation of printer files, and other user software provided on the User Software CD. It also explains how to connect each user to the network.

The Printing Guide describes the printing features of the ColorPASS for users who send jobs via remote workstations on the network.