MA0309-EB

Operation Guide 2790

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this manual and keep it on hand for later reference when necessary.

Expose the watch to bright light to charge its battery before using it.

You can use this watch even as its battery is being charged by exposure to bright light.

•Be sure to read “Battery” for important information you need to know when exposing the watch to bright light.

If the digital display of the watch is blank...

If the Power Saving on indicator (PS) is on the display (either flashing or not flashing), it means that the display is blank because the watch’s Power Saving function has turned off the display to conserve power. Power Saving automatically turns off the display and enters a sleep state whenever your watch is left for a certain period where it is dark. If the watch is kept in the dark for a longer period, the analog hands will also stop moving after a few days.

•The initial factory default setting is Power Saving on.

•The watch recovers from the sleep state if you move it to a well-lit area, if you press any button, or if you angle the watch towards your face for reading.

•See “Power Saving Function” for more information.

About This Manual

•Button operations are indicated using the letters shown

in the illustration.

• For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch.

• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

General Guide

•Press B to change from mode to mode.

•In any mode, press L to illuminate the display.

Timekeeping Mode

Alarm Mode

Stopwatch Mode

Dual Time Mode

Hand Setting Mode

Press .

Timekeeping

This watch features both digital and analog timekeeping. Changing the digital time setting causes the analog setting to be adjusted automatically to match the digital time.

•Whenever you need to adjust both the digital and the analog time settings, make sure you adjust the digital setting first.

•In the Timekeeping Mode, press A to toggle the display between the date screen and the time screen.

Date Screen

Time Screen

 

Minute hand

 

Hour : Minutes

Hour hand

Press .

 

Month – Day

 

 

PM indicator

Day of week

Seconds

Seconds

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you can also specify the illumination duration.

To set the digital time and date

1.In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen.

• The hour hand and minute hand of the watch do not move while the setting screen is on the display.

2. Press B to move the flashing in the sequence shown below to select the other settings.

Seconds/Illumination duration

 

 

Hour

 

 

Minutes

 

 

 

 

Day Month Year

3.When the setting you want to change is flashing, use C and L to change it as described below.

Screen

To do this:

Do this:

36

Reset the seconds to 00

Press C.

 

Toggle illumination duration between three seconds

Press L.

 

(3" displayed) and one second (3" not displayed)

 

P10:08

Change the hour or minutes

Press C (+).

2003

Change the year

 

6-30

Change the month or day

 

4. Press A to exit the setting screen.

•When you use the above procedure to set the digital display time, the hands of the analog timepiece normally adjust according to your setting.

•For more information about illumination duration, see “Display Illumination”.

•Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes.

•The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press C to toggle between 12-hour timekeeping (indicated by A or P on the display), or 24-hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes.

1