MA0609-EA
Operation Guide 3038
Note that instructions do not contain any
information about using the Magic Mode.
Reading the Display
The display normally shows the current time and date (in the Timekeeping Mode).
| Day of the Week | |
Indicator |
| Day |
|
| |
Button |
| Button |
Button |
| Button |
PM indicator |
|
|
(A for AM) | Hour | Second |
| Minute | |
Days of the Week |
| |
SU: Sunday | MO: Monday | TU: Tuesday |
WE: Wednesday | TH: Thursday FR: Friday SA: Saturday | |
●Toggling between Date Displays
Each press of the D button toggles between the two date displays shown below.
Day of the Week |
|
Day | Month Day |
●Turning the Button Operation Tone On and Off
Perform the following operation to toggle the button operation tone on (tone sounds when a button is pressed) and off. When any screen besides a setting screen (one with a flashing setting) is on the display, hold down the C button for about three seconds.
• This will cause the button operation tone to sound and then toggle the tone on or off.
•The 
is on the display while the operation
tone is off.
• Holding down the C button also changes the watch’s current mode.
•The watch’s alarm and hourly time signal will still sound even when the operation tone is turned off.
Illumination
Pressing the B button in any mode besides the Magic Mode or while a setting screen (one with a flashing setting) is on the display will turn on illumination.
•Illumination provides easy reading in the dark.
Important!
•Illumination may be difficult to see under bright sunlight.
•If you press the Bbutton, or if an alarm or other beeper operation starts while the face is illuminated, illumination will turn off.
•You may notice a slight sound from the watch while illumination is turned on. This is the sound of EL panel vibration and does not indicate malfunction.
●Indicators
•Indicators are not displayed when performing a magic trick.
Button operation tone is off 
Alarm is on 
Hourly time signal is on 
Modes
Timekeeping Mode
Each press of the C button cycles through available modes in the sequence shown below.
Magic Mode
You can select from among five magic tricks.
Using the Stopwatch
In the Timekeeping Mode, press the C button three times to enter the Stopwatch Mode.
Timekeeping Mode | Stopwatch Mode |
About 1 second
Hour
■Measuring Elapsed Time
In the Stopwatch Mode...
•Each press of the D button starts or stops the stopwatch.
•Pressing the Abutton while the stopwatch is stopped will reset stopwatch to all zeros.
Reset
Start / Stop
Start | Stop | Reset |
Cumulative Time Measurement
Stopwatch Mode
The stopwatch performs 1/100 second elapsed time measurement up to 23 hours, 59 minutes, 59.99 seconds (24 hours).
Alarm Mode
This mode lets you configure a daily alarm and an hourly time signal.
Minute
Second
1/100 second
Stopwatch Mode
•The stopwatch performs 1/100 second elapsed time measurement up to 23 hours, 59 minutes, 59.99 seconds (24 hours). When the maximum limit is reached, the elapsed time returns to zero automatically and timing continues from there.
Pressing the D button to restart the stopwatch without resetting it to all zeros will resume elapsed time measurement from where it was last stopped.
1