Casio 2499, 3092 manual

MA0702-EA

Operation Guide 2499/3092

About This Manual

•The operational procedures for Modules 2499 and 3092 are identical. All of the illustrations in this manual show Module 2499.

•Button operations are indicated using the letters shown in the illustration.

•Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

Module 2499

Module 3092

General Guide

•Press C to change from mode to mode.

•In any mode, press B to illuminate the display.

Timekeeping Mode

Alarm Mode

Press .

Timekeeping

•In any mode, hold down C for about two seconds to return to the Timekeeping Mode.

•In the Alarm, Stopwatch and Dual Time modes, the watch always shows the current Timekeeping Mode time in the lower display area.

Stopwatch Mode			Dual Time Mode

Alarm Types

The alarm type is determined by the settings you make, as described below.

PM indicator

Day of week

year Month – Day Hour : Minutes Seconds

Use the Timekeeping Mode to set and view the current time and date.

To set the time and date

1.In the Timekeeping Mode, hold down Auntil the seconds start to flash, which indicates the setting screen.

2.Press Cto move the flashing in the sequence shown below to select other settings.

Seconds Hour Minutes

	Day			Month			Year
	Day			Month			Year

•Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set.

•Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set.

•1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at time you set, only during the month you set.

•Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at time you set, on the day you set.

3.When the setting you want to change is flashing, press D to change it as described below.

To change this setting	Perform this button operation
Seconds	Press D to reset to 00.
Hour, Minutes, Year, Month, Day	Press Dto increase the setting.

•Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4.Press Ato exit the setting screen.

•The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press Dto toggle between 12-hour timekeeping and 24-hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes.

Alarm

To set an alarm time

1. In the Alarm Mode, press Dto display the alarm screen.

2. Hold down Auntil the hour setting of the alarm time starts to flash, which indicates the setting screen.

• This operation automatically turns on the one-time alarm.

3.Press Cto move the flashing in the sequence shown below to select other settings.

Hour Minutes Month Day

4.While a setting is flashing, press Dto increase it.

•To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set x for the month. Press D until the x mark appears (between 12 and 1) while month setting is flashing.

•To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set xx for the day. Press Duntil the xx mark appears (between the end of the month and 1) while the day setting is flashing.

•When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. or p.m. (P indicator).

5.Press Ato exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for about 10 seconds. In the case of the snooze alarm, the alarm repeats up to seven times every five minutes.

•Pressing any button stops the alarm tone operation.

•The alarm and the Hourly Time Signal sound in all modes.

Hour : Minutes

Month – Day

The multi-function alarm lets you specify the hour, minutes, month, and day for the alarm. You can set up the alarm so it sounds once when the alarm time is reached, or for a snooze alarm that repeats up to seven times, every five minutes.

You can also turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour.

•Pressing D in the Alarm Mode toggles between the alarm screen (Alarm time displayed) and the Hourly Time Signal screen (:00 displayed).

•An alarm setting (and an Hourly Time Signal setting) is

available in the Alarm Mode, which you enter by pressing C.

To select the alarm type

1. In the Alarm Mode, press Dto display the alarm

Alarm on/off indicator	screen.
	2. Press Ato cycle through the available alarm settings
	shown below.
	Alarm off	One-time	Snooze
		alarm on	alarm on

•The alarm on indicator and the snooze alarm on indicator are shown on the display in all modes while these functions are turned on.

•The snooze alarm on indicator flashes during the 5-minute intervals between alarms.

•Displaying the Alarm Mode setting screen automatically changes the alarm type to one-time alarm.

•Changing the Timekeeping Mode setting screen during a 5-minute interval between snooze alarms stops the current snooze alarm operation (but snooze alarm remains as the alarm type setting).

•If a snooze alarm time is reached while you are setting the current time in the Timekeeping Mode, the alarm sounds only once. Subsequent snooze alarm operations are not performed.