MA0504-EA

Operation Guide 3797

About This Manual

(Crown)

• Button operations are indicated using the letters shown

in the illustration.

 

 

 

 

• Each section of this manual provides you with the

 

 

information you need to perform operations in each

 

 

mode. Further details and technical information can be

 

 

found in the “Reference” section.

General Guide

•Press A to change from mode to mode.

Timekeeping Mode

Day Counter Mode

Alarm Mode

Stopwatch Mode

Press .

Timekeeping

Day Counter

Hour : Minutes Seconds PM indicator

Month.Day

Day of week

Countdown indicator

This watch features separate digital and analog timekeeping. The procedures for setting the digital time and analog time are different.

You can turn on an Hourly Time Signal that causes the watch to beep every hour on the hour.

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you can also configure settings for the 12/24-hour format.

Days to/from target date

The Day Counter Mode displays the number of days and

the number of hours left until the start (00:00) of a future

 

Mode indicator

target date. If you specify a past date for the target date,

 

 

 

 

the Day Counter Mode shows the number of days and the

 

 

 

 

 

 

 

 

number of hours since the start (00:00) of the target date.

 

 

 

 

When the alarm is turned on, it sounds when the target

 

 

 

 

date and Timekeeping Mode date match.

 

 

 

 

The default target date is January 1, 2000.

 

 

 

 

• All of the operations in this section are performed in the

 

 

 

 

Day Counter Mode, which you enter by pressing A.

 

 

 

Time to/from target date

 

Using the Day Counter

To set the digital time and date

1.In the Timekeeping Mode, hold down B until the seconds starts to flash, which indicates the setting screen.

2.Press B to move the flashing in the sequence shown below to select the other settings.

 

 

Hold down .

 

Press .

 

 

 

 

 

 

Timekeeping

 

 

 

 

 

Seconds

 

 

 

 

Minutes

 

 

 

Hour

 

 

 

Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12/24-hour

 

 

 

Year

 

 

Day of

 

 

Day

 

 

Month

 

 

 

Format

 

 

 

 

 

the Week

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.When the setting you want to change is flashing, use C to change it as described below.

Screen

To do this:

Do this:

 

Reset the seconds to 00

Press C.

 

Change the hour or minutes

Use C(+).

 

Change the month or day

Use C(+).

 

Change the day of the week

 

 

Change the year

Use C(+).

 

Toggle between 12-hour (12H) and 24-hour (24H)

Press C.

 

timekeeping

 

4. After setting the 12/24-hour format, press B to exit the setting screen.

• You can also press A to exit the setting screen while any other setting is flashing.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

Countdown indicator

Countdown Screen

To specify a target date

Month.Day Year

Target date

The following explains what happens after you specify a target date.

•The watch will sound a 20-second alarm when the Timekeeping Mode reaches the start (00:00) of the date specified as the target date.

•You can disable the day counter alarm if you want.

•When the target date is after the date on the Timekeeping Mode screen, the countdown indicator (CD) flashes on the Day Counter Mode screen and is displayed (without flashing) on other mode screens.

•When the target date is before the date on the Timekeeping Mode screen, the count up indicator (CU) flashes on the Day Counter Mode screen and is displayed (without flashing) on other mode screens.

1.In the Day Counter Mode, hold down B until the month digits of the current target date start to flash. This is the setting screen.

2.Press B to move the flashing in the sequence shown below to select the other settings.

 

 

Hold down .

 

Press .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Day Counter

 

 

 

 

 

Month

 

 

 

 

 

Day

 

 

Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alarm on/off

 

 

 

 

Year

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

applied in all modes.

To turn the Hourly Time Signal on and off

 

 

In the Timekeeping Mode, press B and C at the same

Hourly time signal on time to toggle the Hourly Time Signal on (

displayed)

indicator

and off ( not displayed).

 

 

• The Hourly Time Signal on indicator (

) is displayed in

 

all modes.

Setting the Analog Time

Perform the procedure below when the time indicated by the analog hands does not match the time of the digital display.

To adjust the analog time

1. When the second hand is at 12 o’clock, pull out the

Crown crown to stop second hand movement.

2. Rotate the crown to the set the analog time. Move the minute hand about three or four minutes past the minute you want to set, and then move it back to the desired setting.

3. When the time on the digital display reaches 00 seconds, push the crown back in to restart the second hand.

3.Use C to change the setting.

•While the month, day, or year is flashing, press C to change (advance) the setting.

•While the alarm on/off setting is flashing, press C to toggle the alarm on and off.

•To test the alarm, hold down C while the alarm on/off setting is flashing.

4.After selecting the alarm on/off setting, press B to exit the setting screen.

•You can also press A to exit the setting screen while any other setting is flashing.

•You can set a target date in the range of January 1, 1997 to December 31, 2099.

To check the current target date

In the Day Counter Mode, hold down C to display the current target date.

To stop the alarm tone after it starts to sound

Press any button.

1