MA0906-EB

Operation Guide 5059 (A)(B)

About This Manual

•The operational procedures for Modules 5059 (A) and 5059 (B) are identical. All of the illustrations in this manual show Module 5059 (A).

•Button operations are indicated using the letters shown in the illustration.

•For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch.

•Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

•Depending on the model of your watch, display text appears either as dark figures on a light background or light figures on a dark background.

All sample displays in this manual are shown using dark figures on a light background.

For indicators, “On” is indicated by a dark indicator on the positive (dark-on-light) display, and by a light indicator on the negative (light-on-dark) display.

Module 5059 (A)

Module 5059 (B)

General Guide

•Press Cto change from mode to mode.

•In any mode (except when a setting screen is on the display), press B to illuminate the display.

Timekeeping Mode

 

 

 

World Time Mode

Countdown Timer Mode

Stopwatch Mode

 

Alarm Mode

 

Hand Setting Mode

 

 

 

 

 

Press .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Timekeeping

This watch features separate digital and analog timekeeping. The procedures for setting the digital time and analog time are different.

•In the Timekeeping Mode, you can press D to change the display format as shown below.

Seconds

Day of the Week

Month – Day

Hour : Minutes

 

Press .

 

PM indicator

 

 

 

Seconds

Day of week

Month – Day

Hour : Minutes

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you can also configure settings for summer time (Daylight Saving Time or DST), your Home City code (the code for the city where you normally use the watch), the 12/24-hour format, and the illumination duration.

•This watch is preset with a number of city codes, each of which represents the time zone where that city is located. When setting the digital time, it is important that you select the correct city code for your Home City. If your location is not included in the preset city codes, select the preset city code that is in the same time zone as your location.

•Note that all of the times for the World Time Mode city codes are displayed in accordance with the digital time and date settings you configure in the Timekeeping Mode.

•After you correctly set your Home City time and date, you can set the watch up for timekeeping with a different city code simply by changing the Home City code in the Timekeeping Mode.

To set the digital time and date

 

1. In the Timekeeping Mode, hold down Auntil the

 

seconds start to flash, which indicates the setting

 

screen.

 

2. Press Ctwice to move the flashing to the Home City

 

code setting (see the illustration below), and then use

 

B and D to select the code you want.

 

• Make sure you select your Home City code before

Seconds

changing any other setting.

•For full information on city codes, see the “City Code Table”.

3.Press Cto move the flashing in the sequence shown below to select the other settings.

Seconds

 

 

DST

 

 

Home City Code

 

 

Hour

 

 

Minutes

 

 

 

 

Illumination Duration Day Month Year 12/24-Hour Format

4.When the setting you want to change is flashing, use Band Dto change it as described below.

Screen

To do this:

Do this:

 

Reset the seconds to 00

Press D.

 

Toggle between Daylight Saving Time (ON)

Press D.

 

and Standard Time (OFF)

 

 

Change the Home City code

Use D(east) and B(west).

 

Change the hour or minutes

Use D(+) and B (–).

 

Toggle between 12-hour (12H) and 24-hour

Press D.

 

(24H) timekeeping

 

 

Change the year

Use D(+) and B (–).

 

Change the month or day

 

 

Select one second ( ) or three seconds ( )

Press D.

 

as the illumination duration

 

5. Press Ato exit the setting screen.

•Resetting the seconds only (without changing the DST, Home City code, hour, or minute setting) causes the analog minute hand setting to be adjusted automatically.

•See “Digital Time Daylight Saving Time (DST) Setting” below for details about the DST setting.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes.

•For details about illumination duration, see “Illumination”.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down Auntil the seconds start to flash, which indicates the setting screen.

2.Press Conce to display the DST setting screen.

3.Press Dto toggle between Daylight Saving Time (ON

 

displayed) and Standard Time (OFF displayed).

 

4. Press Ato exit the setting screen.

 

• The DST indicator appears on the Timekeeping, Alarm,

 

and Hand Setting Mode to indicate that Daylight Saving

DST indicator

Time is turned on.

1