Operation Guide 5105
To set an alarm time
1.In the Alarm Mode, use Dto scroll through the alarm screens until the one whose time you want to set is
displayed.
• To set a
•SIG is the hourly time signal setting.
•The snooze alarm repeats every five minutes.
2.After you select an alarm, hold down Afor about three seconds until the hour setting of the alarm time starts to flash. This is the setting mode.
•This operation turns on the alarm automatically.
3.Press C to move the flashing between the hour and minute settings.
4.While a setting is flashing, use D(+) and
5.Press A to exit the setting mode.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off.
•Alarm and Hourly Time Signal operations are performed in accordance with the current time in your Home City, as kept in the Timekeeping Mode.
•To stop the alarm tone after it starts to sound, press any button.
•Performing any one of the following operations during a
Displaying the Timekeeping Mode setting screen Displaying the SNZ setting screen
To turn an alarm on and off
Snooze alarm indicator | 1. In the Alarm Mode, use D to select an alarm. | |
2. Press A to toggle it on and off. | ||
| ||
Alarm on | • Turning on a alarm (AL1, AL2, AL3, AL4 or | |
indicator | SNZ) displays the alarm on indicator on its Alarm | |
| Mode screen. | |
| • In all modes, the alarm on indicator is shown for any | |
| alarm that currently is turned on. | |
| • The alarm on indicator flashes while the alarm is | |
| sounding. | |
| • The snooze alarm indicator flashes while the snooze | |
| alarm is sounding and during the | |
| between alarms. |
ON
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Hourly time signal | Signal (SIG). | |
on indicator | ||
2. Press A to toggle it on and off. | ||
| ||
| • The Hourly Time Signal on indicator is shown on the | |
| display in all modes while this function is turned on. |
Illumination
To turn the auto light switch on and off
In the Timekeeping Mode, hold down Bfor about three seconds to toggle the auto light switch on (auto light switch on indicator displayed) and off (auto light switch on indicator not displayed).
•The auto light switch on indicator is on the display in all modes while the auto light switch is turned on.
Power Supply
This watch is equipped with a solar cell and a special rechargeable battery (secondary battery) that is charged by the electrical power produced by the solar cell. The illustration shown below shows how you should position the watch for charging.
Example: Orient the watch so its face is | Solar cell | |
pointing at a light source. | ||
| ||
• The illustration shows how to position |
| |
a watch with a resin band. |
| |
• Note that charging efficiency drops |
| |
when any part of the solar cell is |
| |
blocked by clothing, etc. |
|
•You should try to keep the watch outside of your sleeve as much as possible. Charging is reduced significantly if the face is even only partially covered.
Important!
•Storing the watch for long periods in an area where there is no light or wearing it in such a way that it is blocked from exposure to light can cause rechargeable battery power to run down. Be sure that the watch is exposed to bright light whenever possible.
•This watch uses a special rechargeable battery to store power produced by the solar cell, so regular battery replacement is not required. However, after very long use, the rechargeable battery may lose its ability to achieve a full charge. If you experience problems getting the special rechargeable battery to charge fully, contact your dealer or CASIO distributor about having it replaced.
•Never try to remove or replace the watch’s special battery yourself. Use of the wrong type of battery can damage the watch.
•All data stored in memory is deleted, and the current time and all other settings return to their initial factory defaults whenever battery power drops to Level 5 (CHG) and when you have the battery replaced.
•Turn on the watch’s Power Saving function and keep it in an area normally exposed to bright light when storing it for long periods. This helps to keep the rechargeable battery from going dead.
Battery Power Indicator and Power Recovery Mode indicator
The battery power indicator indicates you the current status of the rechargeable battery’s power.
Level | Battery Power Indicator | Function Status | |||||
1 |
|
|
|
|
|
| All functions enabled. |
(H) |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
| All functions enabled. |
(M) |
|
|
|
|
|
|
|
3 | l | l | l l | ll | Illumination and beeper | ||
|
|
|
| l | disabled. | ||
l |
|
|
| ||||
|
|
|
| l | |||
(L) | l |
| l l l |
|
| ||
|
|
|
| ||||
Battery Power | (Charge Soon Alert) |
| |||||
indicator |
|
|
|
|
|
| Except for timekeeping, all |
4 |
|
|
|
|
|
| functions and display |
(CHG) |
|
|
|
|
|
| |
|
|
|
|
|
| indicators disabled. | |
|
|
|
|
|
|
| |
5 |
|
|
|
|
|
| All functions disabled. |
(CHG) |
|
|
|
|
|
|
|
Auto light switch on indicator
An LED
•The auto light switch must be turned on (indicated by the auto light switch on indicator) for it to operate.
•See “Illumination Precautions” for other important information about using illumination.
To illuminate the display manually
In any mode (except a setting mode), press B to turn on the illumination for about one second.
•The above operation turns on illumination regardless of the current auto light switch setting.
•The flashing LOW indicator at Level 3 (L) tells you that battery power is very low, and that exposure to bright light for charging is required as soon as possible.
•At Level 5 (CHG), all functions are disabled and settings return to their initial factory defaults. Once the battery reaches Level 2 (M) after falling to Level 5 (CHG), reconfigure the current time, date, and other settings.
•Display indicators reappear as soon as the battery is charged from Level 5 (CHG) to Level 2 (M).
•The watch’s Home City code setting will change automatically to TYO (Tokyo) whenever the battery drops to Level 5 (CHG). If this happens, change the Home City to the setting you want.
•Leaving the watch exposed to direct sunlight or some other very strong light source can cause the battery power indicator to show a reading temporarily that is higher than the actual battery level. The correct battery level should be indicated after a few minutes.
About the Auto Light Switch
Turning on the auto light switch causes illumination to turn on, whenever you position your wrist as described below in any mode.
Note that this watch features a “Full Auto LED Light”, so the auto light switch operates only when available light is below a certain level. It does not illuminate the display under bright light.
•The auto light switch is always disabled, regardless of its on/off setting, while an alarm is sounding.
Moving the watch to a position that is parallel to the ground and then tilting it towards
you more than 40 degrees causes illumination to turn on.
• Wear the watch on the outside of your wrist.
Power recovery mode indicator
•Overuse of display illumination or the beeper can cause the RECOV (Recover) indicator to appear in the upper display, which indicates that the watch is in the battery power recovery mode. Face illumination, the alarm, the countdown timer alarm, and all hand operations are disabled in the power recovery mode. The watch continues to keep time internally, so normal timekeeping and function will resume as soon as battery power recovers to normal levels, which is indicated when the
RECOV indicator disappears.
•If RECOV appears frequently, it probably means that remaining battery power is low. Leave the watch in bright light for some time to allow it to charge.
Parallel to | More than |
ground | 40° |
Warning!
•Always make sure you are in a safe place whenever you are reading the display of the watch using the auto light switch. Be especially careful when running or engaged in any other activity that can result in accident or injury. Also take care that sudden illumination by the auto light switch does not startle or distract others around you.
•When you are wearing the watch, make sure that its auto light switch is turned off before riding a bicycle or operating a motorcycle or any other motor vehicle. Sudden and unintended operation of the auto light switch can create a distraction, which can result in a traffic accident and serious personal injury.
Charging Precautions
Certain charging conditions can cause the watch to become very hot. Avoid leaving the watch in the areas described below whenever charging its rechargeable battery. Also note that allowing the watch to become very hot can cause its liquid crystal display to black out. The appearance of the LCD should become normal again when the watch returns to a lower temperature.
Warning!
Leaving the watch in bright light to charge its rechargeable battery can cause it to become quite hot. Take care when handling the watch to avoid burn injury. The watch can become particularly hot when exposed to the following conditions for long periods.
•On the dashboard of a car parked in direct sunlight
•Too close to an incandescent lamp
•Under direct sunlight
3