Casio 5344 manual

MA1212-EAÚ #!3)/ #/-054%2 #/#,4$

Operation Guide 5344

ξYour watch may differ somewhat from the one shown in the illustration.

ξSome models may use a combination of hands and rotating disks to indicate information. The word “hand” in this section is used to mean both analog hands and rotating disks.

			Hour Hand				Minute Hand
									A		Click 2
	Stopwatch Minute Hand									Click 1
	Second Hand
									B
									Crown
		Stopwatch Second Hand						Day Indicator
				24 Hour Hand
	Stopwatch functions
To adjust the time setting					To change the day indicator setting
	When the second hand is at					Pull the Crown out to Click 1.
	12 o’clock, pull the Crown out to
	Click 2.
						Rotate the Crown to set the day.
	Rotate the Crown to change the					Push the Crown back in.
	time setting.
	Push the Crown back in.				Note
					ξ	The day indicator setting uses a 31-
						day month. Make adjustments for
Note					ξ	months of shorter lengths.
ξ	Take care that you set the correct AM					Avoid changing the day indicator
						setting between the hours of 9
	or PM time.
ξ						p.m. and 1 a.m. Otherwise, the day
	When changing the time, move the

minute hand four or fi ve minutes past	indicator may not change correctly at
	midnight.
your fi nal setting, and then back it up
to the setting you want.

Using the Stopwatch

The stopwatch measures elapsed time in 1-second increments up to 59 minutes, 59 seconds.

Elapsed time
A	A	A	A	B
Start	Stop	Re-start	Stop	Reset
Split time
A	B	B	A	B
Start	Split	Split release	Stop	Reset
Two finishes
A	B	A	B	B
Start	Split	Stop	Split release	Reset
	First runner	Second runner	Display time of
	fi nishes.	fi nishes.	second runner.
	Display time of
	fi rst runner.

Important!

ξDo not operate the stopwatch with the crown pulled out.

Note

ξAn elapsed time operation will stop automatically at the end of 60 minutes.

Correcting the 0 Positions of the Hands

Perform the following procedure if the stopwatch hands do not return to their 0 (zero) positions when you reset the stopwatch.

Pull the Crown out to Click 2.

Use B (clockwise) and A (counterclockwise) to move the Stopwatch Second Hand and Stopwatch Minute Hand to 12 o'clock.

ξHolding down either button will move the second hand at high speed, until you release the button.

ξThe Stopwatch Minute Hand is syncronized with the Stopwatch Second Hand .

After all of the hands are the way you want, push the Crown back in.

Crown Operations

Some water-resistant models (100 meters, 200 meters) have a screw-in crown. When you need to perform a crown operation, rotate it towards you to unscrew it. Then pull the crown out. Avoid applying undue force when pulling. The watch loses its water resistance while the crown is unscrewed. After performing a crown operation, fully screw the crown back in.

If your watch has a rotary bezel...

You can rotate the bezel to align its ▼ mark with the minute hand. Then you will be able to tell how much time has elapsed since aligning the ▼ mark.

Current

Crown

Loosen

Start

Elapsed time

Important!

ξTimekeeping stops while the crown is pulled out. Correct the current time setting after performing the above operation.

Specifications

Accuracy: ±20 seconds average per month

Stopwatch: Measuring Capacity: 59'59" (60 minutes) Measuring Unit: 1 second

Measurements: Elapsed time; split time; two fi nishes

Battery: One silver oxide battery (Type: SR920SW)

Battery Life: Approximately 2 years (60 minutes stopwatch operation per day)

1