Operation Guide 5056
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to read this manual carefully.
Warning!
•The measurement functions built into this watch are not intended for use in taking measurements that require professional or industrial precision. Values produced by this watch should be considered as reasonably accurate representations only.
•When fishing, always take proper precautions to ensure your own personal safety and the personal safety of others around you.
•The fishing level indicator and moon phase indicator produced by this watch are all based on calculations that use the watch’s current time, date, and Home Site settings. Because of this, you should make sure that the current date and time, and your Home Site data are all correct before using the indicators.
General Guide
•Press Cto change from mode to mode.
•In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode Press C. | ▲ |
| Hand Setting Mode |
▲ | ▲ |
Warning!
•See the “Timekeeping” section of this manual for information about setting the current time and date, and about specifying your Home Site.
•Note that the fishing level indicator and moon phase indicator are all based on calculated values. They are provided only for reference purposes.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction.
About This Manual
| (Light) | • Button operations are indicated using the letters shown |
| in the illustration. | |
|
| |
|
| • For the sake of simplicity, the sample displays in this |
|
| manual do not show the analog hands of the watch. |
|
| • Each section of this manual provides you with the |
|
| information you need to perform operations in each |
|
| mode. Further details and technical information can be |
|
| found in the “Reference” section. |
| Temperature Data |
|
| Recall Mode | Stopwatch Mode |
|
| |
▲ |
| ▲ |
World Time Mode | Alarm Mode | ▲ |
Countdown Timer | ||
|
| Mode |
▲ |
| ▲ |
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
This watch features separate digital and analog timekeeping. The procedures for setting the digital time and analog time are different.
•In the Timekeeping Mode, press A to toggle between the thermometer screen and the temperature tendency screen.
Thermometer Screen |
| Temperature Tendency | |
| Screen | ||
Temperature | Moon phase | ||
| |||
Day of | indicator | Temperature | |
week – | |||
Press A. | tendency | ||
Day | |||
graph | |||
|
|
| ▲ | ▲ |
PM | Seconds |
|
|
| |
indicator | Fishing level |
|
Hour : Minutes | indicator |
|
•The fishing level indicator indicates the times when fish can be expected to be feeding. For more information, see “Fishing Mode”.
•The Moon phase indicator shows the current Moon phase in accordance with the current date as kept in the Timekeeping Mode.
•See “Thermometer” for details about the thermometer screen and temperature tendency graph.
Important!
•Be sure to configure the current time and date, and your Home Site data (data for the site where you use the watch) correctly before using the functions of this watch. See “Home Site Data” for more information.
Setting the Digital Time and Date
This watch is preset with UTC differential values that represent each time zone around the globe. Before setting the digital time, be sure to first set the UTC differential for your Home Site, which is the location where you normally will be using the watch.
•Note that World Time Mode times are all displayed based on the time and date settings you configure in the Timekeeping Mode.
To set the digital time and date
|
|
|
|
|
|
| 1. In the Timekeeping Mode, hold down Auntil the | |||||||||||||||||||
|
|
|
|
|
|
|
| seconds start to flash, which indicates the setting | ||||||||||||||||||
|
| lll |
|
|
|
| screen. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| • Be sure to configure the correct UTC differential for | ||||||||||||||||||||
|
| ll | l |
|
| your Home Site before configuring any other | ||||||||||||||||||||
|
|
|
| l |
|
| Timekeeping Mode settings. |
|
|
|
|
|
|
|
| |||||||||||
|
|
| lll |
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
| l |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| • See the “City Code List” for information about the UTC | ||||||||||||||||||
|
|
|
|
|
|
|
| differential settings that are supported. | ||||||||||||||||||
|
| Seconds |
| 2. Press Cto move the flashing in the sequence shown | ||||||||||||||||||||||
|
|
|
| below to select the setting you want. |
|
|
|
|
|
|
|
| ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Seconds |
| DST |
|
| UTC |
|
|
| Hour |
|
| Minutes |
|
|
|
|
| |||||||
|
|
|
|
|
|
|
| Differential |
|
|
|
|
|
|
|
|
|
|
|
| Format |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Temperature |
|
| Temperature Sensor |
|
| Day |
|
| Month |
|
|
| Year |
|
|
|
| |||||||
|
| Unit |
|
|
|
|
| Calibration |
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.When the setting you want to change is flashing, use D and Bto change it as described below.
Screen: | To do this: | Do this: |
| Reset the seconds to 00 | Press D. |
|
|
|
| Toggle between Daylight Saving | Press D. |
| Time (ON) and Standard Time (OF) |
|
| Specify the UTC differential | Use D (+) and |
|
|
|
| Change the hour or minutes | Use D (+) and |
|
|
|
| Toggle between | Press D. |
|
| |
| Change the year, month, or day | Use D (+) and |
|
|
|
•The UTC differential setting range is
•For information about settings other than the time and date, see the following. Temperature Sensor Calibration: “Thermometer”
Temperature Unit: “To specify the temperature display unit”
4.Press Atwice to exit the setting screen.
•The
•The day of the week is displayed automatically in accordance with the date (year, month, and day) settings.
•See “Daylight Saving Time (DST) Setting” below for details about the DST setting.
•Any time the seconds setting is changed, the analog hands are adjusted accordingly.
Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard Time
On/Off status | 1. In the Timekeeping Mode, hold down Auntil the | ||
seconds start to flash, which indicates the setting | |||
|
| ||
lll | screen. | ||
2. Press C once and the DST setting screen appears. | |||
ll | l | 3. Press D to toggle between Daylight Saving Time (ON | |
| l | displayed) and Standard Time (OF displayed). | |
| l | ||
| l | ||
l l l |
| ||
lll | l | 4. Press A twice to exit the setting screen. | |
l | |||
ll l | |||
|
| • The DST indicator appears on the Timekeeping, Fishing, | |
DST indicator | Alarm, and Hand Setting Mode screens to indicate that | ||
Daylight Saving Time is turned on. In the case of the |
Fishing Mode, the DST indicator appears on the fishing level screen only.
Home Site Data
Moon phase, the fishing level indicator, and Fishing Mode data will not be displayed properly unless Home Site data (UTC differential and longitude) is configured correctly.
•The UTC differential is a value that indicates the time difference between a reference point in Greenwich, England and the time zone where a city is located.
•The letters UTC is the abbreviation for Coordinated Universal Time, which is the
rotation.
1