3Fix 4Norm Specifies the number of digits for display of a calculation result.

Fix: The value you specify (from 0 to 9) controls the number of decimal places for displayed calculation results. Calculation results are rounded off to the specified digit before being displayed.

Example: L 100 ÷ 7 = 14.286 (Fix 3)

14.29(Fix 2)

Norm: Selecting one of the two available settings (Norm 1, Norm 2) determines the range in which results will be displayed in non-exponential format. Outside the specified range, results are displayed using exponential format.

Norm 1: 10–2 x, x  1010 Norm 2: 10–9 x, x  1010

Example: L 1 ÷ 200 = 5 ⋅ 10–3

(Norm 1)

0.005

(Norm 2)

 

 

5ab/c 6d/c Specifies either mixed fraction (ab/c) or improper fraction (d/c) for display of fractions in calculation results.

7Simp 1Auto ; 2Manual Specifies automatic or manual simplification of fractions. When manual is specified, fraction calculation results are always displayed as improper fractions, even if the fraction display format setting is ab/c.

Even if the result of a calculation can be displayed as a fraction when automatic simplification is used, performing the same calculation with manual simplification may produce a non-fraction (decimal) result.

Example: 2 23 × 5 18

sh(Simp)b(Auto)

k2 e2 c3 e*k5 e1 c8 =

sh(Simp)c(Manual)

k2 e2 c3 e*k5 e1 c8 =

￿￿ ￿￿￿￿￿413

328

￿

24

8]CONT' Adjusts display contrast. See “Adjusting Display Contrast” for details.

Initializing Calculator Settings

Perform the following procedure to initialize the calculator, which returns all settings, including setup menu settings, to their initial defaults.

f1(Setup)=(Yes)

InputtingExpressions and Values

Basic Input Rules

Calculations can be input in the same form as they are written. When you press = the priority sequence of the input calculation will be evaluated automatically and the result will appear on the display.

E-5