Specifying ISO Sensitivity (ISO)
ISO sensitivity is a measure of sensitivity to light.
1.In the REC mode, use [8] and [2] to select the third control panel option from the top (ISO Sensitivity).
2.Use [4] and [6] to select the setting you want and then press [SET].
AUTO Adjusts sensitivity automatically according to conditions
ISO 100 | Lower sensitivity | Slow shutter speed | Less noise | ||||
|
|
|
|
|
|
| |
ISO 200 |
|
|
|
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
ISO 400 |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
ISO 800 |
|
|
|
|
|
| |
|
| Fast shutter speed (Set | Some coarseness | ||||
|
| ||||||
|
|
| for shooting in dimly lit | (increased digital | |||
ISO 1600 | Higher sensitivity | ||||||
areas.) | noise) | ||||||
|
|
|
|
|
|
| |
•“AUTO” ISO sensitivity always is applied for movies, regardless of the current ISO sensitivity setting.
•“S Image AS” (page 81) can be used only when the ISO sensitivity setting is “AUTO”.
•An ISO setting of ISO 400 or greater is not supported when the “Image Size” setting is “RAW+”. If the ISO setting is “ISO 400” or greater when you change the “Image Size” setting to “RAW+”, an ISO setting of ISO 200 will be used for recording.
Adjusting White Balance (White Balance)
You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.
1.In the REC mode, use [8] and [2] to select the fourth control panel option from the top (White Balance).
34 | Snapshot Tutorial |
|