Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
•For information about how to play back movies, see page 99.
•For information about images recorded using continuous shutter (CS), see page 100.
1.Press [p] (PLAY) to enter the
PLAY mode.
• This will display one of the snapshots currently stored in memory.
• Information about the displayed snapshot also is included (page 12).
• You also can clear the information to view only the snapshot (page 159).
•You can zoom in on the image by
sliding the zoom controller towards z (page 105). If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it.
2.Use [4] and [6] to scroll between images.
•Holding down either button scrolls at high speed.
[6][6]
[4][4]
B | 31 | Quick Start Basics |
|