•You can configure the mode so up to 25 images are pre-recorded to the buffer until you fully press the shutter button.

•The minimum number of pre-recorded buffer images you can specify is three. Total recording time depends on the current continuous shutter frames-per-second (fps) setting.

•Specifying zero for the number of pre-recorded images disables Prerecord CS and performs High Speed CS only (without pre-recording).

1.In the REC mode, press [MENU].

2.Use [4] and [6] to select the “REC” tab.

3.Use [8] and [2] to select “CS” and then press [6].

4.Use [8] and [2] to select “High Speed CS”, and then press [SET].

5.Press Ç (Continuous Shutter).

•This will display É (High Speed CS) and surround the monitor screen with a yellow frame. If this does not happen, press Ç again.

6.Press [SET].

7.Use [8] and [2] to select the fifth control panel option from the top (High-speed CS fps).

8.Use [4] and [6] to select the continuous shutter (CS) speed you want and then press [SET].

High Speed CS icon

Yellow frame

CS speed

The camera determines the CS speed by determining the

AUTO surrounding light level and automatically configuring a speed that prevents underexposure.

3 to 30 fps Enablessecond. specification of the number of CS images recorded per

52

Snapshot Tutorial