4.Press [SET], use [8] and [2] to select “Number of Shots”, and then press [SET].
5.Use [8] and [2] to select either “1” or “2” and then press [SET].
| To shoot under these | Select this option: | |
| conditions: | ||
|
| ||
2 | The subject against a | You need to shoot twice to extract the subject. | |
complex background | |||
| The subject against a plain | You need to shoot only once to extract the subject. | |
1 | If you select this option, you will not need to | ||
(no pattern) background | |||
|
| perform steps 7 and 8 of the procedure below. |
6.First, shoot an image that includes the subject you want to extract.
•Shoot an image in which the subject is as large as possible. If you selected “2” for the “Number of Shots” setting, the images should include some easily identifiable reference point that you can use for later alignment in step 7 below.
•If you selected “Moving Subject” the camera will record multiple subject images. Do not move the camera until shooting is complete.
•If you selected “1” for the “Number of Shots” setting, this procedure is complete with this step. The camera will extract the subject and display it on the monitor screen. If you selected “Moving Subject” in step 3, the subject image will be moving on the display.
•Even if you select “1” for the “Number of Shots” setting, certain conditions can cause the setting to switch automatically to “2”.
•Flash is turned off automatically at this time.
108 | Dynamic Photo |
|