3.Click “USB driver B” to select it and then click “Install”.

4.Follow the instructions that appear on the dialog box and click “Next”.

5.When the final screen is reached, click “Finish”.

•Depending on the version of Windows that your computer is running, a message may appear telling you to restart your computer. If your computer displays such a message, restart.

6.To exit the installer, click [Exit] to close the CD-ROM menu and then remove the CD-ROM from your computer.

•Depending on what version of Windows your computer is running, your computer may restart automatically. If this happens, the CD-ROM menu may re-appear after the restart. Click “Exit” to exit the CD-ROM menu and then remove the CD-ROM from your computer.

■Connecting the Camera to Your Computer the First Time

1.Make sure the camera’s battery is fully charged.

2.Turn on the camera, and then press [MENU].

•It makes no difference whether the camera is in the REC mode or the PLAY mode.

3.Select the “Set Up” tab, select “USB”, and then press [S]

4.Use [S] and [T] to select “Mass Storage”, and then press [SET].

5.Turn off the camera, and connect the USB cable that comes bundled with the camera to the camera’s USB/AV connector and your computer’s USB port.

204

USING THE CAMERA WITH A COMPUTER