APPENDIX

•Take care when connecting the USB cable to the USB cradle or your computer. USB ports and cable plugs are shaped for proper positioning.

•Plug the USB cable plugs into the ports securely, as far as they will go. Proper operation is not possible if connections are not correct.

3.Press the camera’s power button to turn it on, and then press its [MENU] button.

4.Select the “Set Up” tab, select “USB”, and then press [￿].

5.Use [￿] and [￿] to select “Mass Storage (USB

DIRECT-PRINT)”, and then press [SET].

6.Turn off the camera.

7.Place the camera onto

the USB cradle.

• Do not place the camera onto the USB cradle while it is turned on.

[USB] button

[USB] lamp

8.Press the USB cradle’s [USB] button.

•Pressing the [USB] button enters the USB mode, which causes the USB cradle’s [USB] lamp to light green.

•Your Macintosh will see the camera’s file memory as a drive.

•The appearance of the drive icon depends on the Mac OS version you are using.

•Your Macintosh will see the camera’s file memory as a drive whenever you establish a USB connection between the camera and your Macintosh.

245