General Guide

Front
Bottom
Liquid crystal

 

display (LCD)
Cover release
Power Keys
Tape cartridge compartment

Turn power on

Main battery

and off.

compartment

 

Tape cutter lever

 

Handle

 

Tape outlet

 

Print key

 

Letter keys

Label Printer Menus

Label printer operation is designed to be as simple as pos- sible, thanks to on-screen menus that you can use to select the settings you need. Each menu is described in detail in the sections that follow in this manual, but note the following general points when using them.

The item that is highlighted in a menu is the one that is currently selected.

Currently

– – – – SET UP

 

– – – –

selected item

 

 

I NPUT

 

 

 

 

 

 

 

 

 

 

CONTRAST

 

 

Use u and ito move the highlighting up and down and change the selected item.

Press SET to execute the highlighted item, or ESC to exit the displayed menu (and return to the previous menu or screen) without selecting anything.

When you press SET to execute a menu item, the label printer either moves on to the next menu, or it executes the selected function and returns to the text input screen that you started from.

AC adaptor

connector
3-pin jack

Replacing the Cover if it Comes Off

If the cover comes off, replace it as shown in the illustration nearby. Take care to avoid damaging the tabs and hinges when installing the cover.

Part 2 Getting Ready

This part of the manual tells you how to load and replace batteries, load the tape cartridge, and perform other basic setups for the label printer.

Important! Be sure to read this section before attempting to use the label printer.

Power Supply

The Label Printer can be powered by a specified AC adaptor (AD-A12070) or eight AA-size alkaline batteries.

AC Adaptor

Note the following important precautions when using an AC adaptor to power your label printer.

Use only specified CASIO AD-A12070 AC adaptor, and make sure the adaptor has the same voltage rating as the household current in your area. Using a wrong adap- tor can damage your label printer.

Be sure to turn the label printer off before you connect the adaptor. Do not turn power on until the adaptor is con- nected to the label printer and plugged into an AC outlet.

E-5