MA0804-EA

Operation Guide 3149

About This Manual

•Button operations are indicated using the letters shown in the illustration.

• Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

General Guide

•Press C to change from mode to mode.

•In any mode, press B to illuminate the display.

Timekeeping Mode

Alarm Mode

Press .

Timekeeping

Month – Day

Use the Timekeeping Mode to set and view the current

time and date.

Day of week

To set the time and date

 

 

1. In the Timekeeping Mode, hold down Auntil the

 

seconds start to flash, which indicates the setting

 

screen.

 

2. Press Cto move the flashing in the sequence shown

 

below to select other settings.

PM indicator

Seconds

Hour

Minutes

Hour : Minutes Seconds

Day

Month

Year

 

3.When the setting you want to change is flashing, press D to change it as described below.

To change this setting

Perform this button operation

Seconds

Press D to reset to 00.

Hour, Minutes, Year, Month, Day

Press Dto increase the setting.

 

 

•Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4.Press Ato exit the setting screen.

•The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

•The year can be set in the range of 2000 to 2099.

•The watch’s built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press Dto toggle between 12-hour timekeeping and 24-hour timekeeping.

•With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m.

•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator.

•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes.

Alarms

 

You can set five independent Daily Alarms. When an

 

alarm is turned on, the alarm tone sounds when the alarm

 

time is reached. One of the alarms can be configured as a

 

snooze alarm or a one-time alarm, while the other four are

 

one-time alarms.

 

You also can turn on an hourly time signal that causes the

 

watch to beep twice every hour on the hour.

Hour : Minutes

• There are five alarm screens numbered1 through 5.

The hourly time signal screen is indicated by :00.

 

•When you enter the Alarm Mode, the screen you were viewing when you last exited the mode appears first.

•All of the operations in this section are performed in the Alarm Mode, which you enter by pressing C.

Alarm Types

The alarm type is determined by the settings you make, as described below.

•Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set.

•Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set.

•1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at time you set, only during the month you set.

•Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at time you set, on the day you set.

•In any mode, hold down C for about two seconds to return to the Timekeeping Mode.

Countdown Timer Mode

Stopwatch Mode

 

Dual Time Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is displayed.

•You can configure Alarm1 as a snooze alarm or a one-time alarm. Alarms 2 through 5 can be used as one-time alarms only.

•The snooze alarm repeats every five minutes.

2.After you select an alarm, hold down Auntil the hour setting of the alarm time starts to flash. This indicates the setting screen.

3. Press Cto move the flashing in the sequence shown below to select other settings.

Hour Minutes Month Day

4.While a setting is flashing, press Dto increase it.

•To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set x for the month. Press D until the x mark appears (between 12 and 1) while month setting is flashing.

•To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set xx for the day. Press D until the xx mark appears (between the end of the month and 1) while the day setting is flashing.

•When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. or p.m. (P indicator).

5.Press Ato exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off or change it to a one-time alarm.

Note

•Pressing any button stops the alarm tone operation.

•Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen Displaying the Alarm1 setting screen

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn Alarms 2 through 5 on and off

One-time alarm on

1. In the Alarm Mode, use Dto select a one-time alarm

(alarm number 2 through 5).

indicator

2. Press Ato toggle the displayed alarm on and off.

 

• Turning on a one-time alarm (2 through 5) displays the

 

one-time alarm on indicator on its screen.

 

• The one-time alarm on indicator is displayed in all

 

modes.

 

• If any alarm is on, the one-time alarm on indicator is

 

shown on the display in all modes.

To select the operation of Alarm1

1.In the Alarm Mode, use Dto select Alarm1.

2.Press Ato cycle through the available settings in the sequence shown below.

Snooze alarm on indicator and one-time alarm on indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

One-time alarm on

 

Snooze alarm on

 

 

 

Alarm off

•The applicable indicator is displayed in all modes when an alarm is turned on.

•The snooze alarm on indicator flashes during the 5-minute intervals between alarms.

•Displaying the Alarm1 setting screen while the snooze alarm is turned on turns off the snooze alarm automatically (making Alarm1 a one-time alarm).

1