Casio 5069, MO0906-EA manual

Minute hand Hour hand

To set the time and date

3 0

Bottom dial hand Indicator hand

Indicator hand

MO0906-EA

Operation Guide 5069

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to read this manual carefully.

What to do if the bottom dial hand is stopped

	The watch is shipped from the factory with the bottom dial
	hand stopped in order to conserve battery power. Even
	though the bottom dial hand is stopped, the watch
	continues to maintain the current time internally. If the
	bottom dial hand is stopped when you purchase the
3	watch, press any one of the watch’s buttons to start hand
0	movement.
Bottom dial hand

About This Manual

Indicator hand

Hour hand Minute hand

	3
	0
Left dial	Day
hand

Bottom dial hand

Right dial hands

•Button operations are indicated using the letters shown in the illustration.

•Each section of this manual provides you with the information you need in order to perform operations in each mode. Further details and technical information can be found in the “Reference” section.

•The bottom dial is a disk that rotates to indicate various types of information, depending on the mode.

-During regular timekeeping, the thick line of the disk indicates the current second. In other modes, the thick line on the disk will indicate the day of the week, the alarm ON/OFF setting, and the DST ON/OFF setting.

-When setting the date, the disk rotates so the arrow mark at the top of the dial points to the value that represents the ones digit of the current year setting. During a stopwatch operation, the dial rotates at one revolution per second. The 1/20-second count is the value indicated by the arrow mark at the top of the dial.

General Guide

Stopwatch Mode

Alarm Mode	World Time Mode
Press C.	Press C.
▲	▲
30	30

Press C.

Timekeeping

	Press D.
	(When the stopwatch
	is reset.)
		3
		0
	Timekeeping Mode	▲
		▲
		Press Bor D.
		Hold down A
		for about three seconds.
	30	▲
▲
		Press A.

Time/Date Adjustment

▲

3 0

Indicator hand

Hour hand		Minute hand
		Day
		30
Left dial		Bottom dial
	▲	hand
hand	▲	Press A.
		30
		3
		0

Use the Timekeeping Mode to set and view the current time and date, and to switch between Standard Time and Daylight Saving Time (summer time).

•Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time.

•Pressing Ain the Timekeeping Mode will cause the bottom dial hand to move to the current day of the week. Also, the indicator hand will move to the city code that is

currently selected as your Home City.

Press Ato return to regular timekeeping. The watch also will return to regular timekeeping if you do not perform any operation for about three seconds.

Nov	Dec	Jan
Oct		Feb

Sep Mar

Aug		3	Apr
		0
Jul	Jun	May

Indicator hand

Setting the Month

9.Use D to move the indicator hand clockwise to the month you want to specify. To set June, for example, move the hand to 6 (Jun).

10.After the month setting is the way you want, press C.

•This will cause the watch to beep and change to the day setting mode.

11.Use D (+) and B(–) to change the day setting.

•When setting the day, the watch automatically will skip days (30 and 31) that are not included in the currently selected month. If you can’t select 30 or 31 when you want to, check to make sure that the proper month is selected.

•You can return to the time setting mode after configuring the day setting by pressing C. Pressing C will cause the watch to beep twice.

City code Day of week

1. In the Timekeeping Mode, hold down Afor about three seconds until the watch beeps.

• The indicator hand will move to the city code that is currently selected as the Home City. This is the city code setting mode.

• The bottom dial hand also will indicate the current DST on/off setting at this time.

2.Press Dto move the indicator hand clockwise, until it points at the city code you want to select as your Home

City.

• For full information on city codes, see the “City Code Table”.

3

0

MonthDay

12.After all of the settings are the way you want and the day display is no longer changing, press A. This will cause the bottom dial hand to start moving again and

the other hands to start moving from their current positions.

•You can press Aat any time during the above procedure to return to regular timekeeping.

•The watch’s built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch’s battery replaced.

Stopwatch

3. Press Bto toggle the DST setting indicated by the bottom dial hand on or off.

	• Even after you change the DST setting, you still can
	use Dto select a different Home City code if you
	want.
	4. After the Home City and DST settings are the way you
	want, press C.
3	• This will cause the watch to beep and the indicator
0	hand to move to the 12 o’clock position. This is the
	time setting mode.
	• All hands (except for the indicator hand and the

bottom dial hand) and the day display will change automatically to the current time and date settings for the selected city code.

•All button operations are disabled while the hands and

Left dial hand	day display are changing.
	5. Use D(+) and B(–) to change the time (hour and
	minute) setting.

Indicator hand

Stopwatch hours (24-hour format)

3 0

Stopwatch minutes

Stopwatch 1/20 seconds

The stopwatch lets you measure elapsed time.

•When you enter the Stopwatch Mode, the bottom dial hand moves to 12 o’clock and the right dial hands move to 12 o’clock.

•You can start elapsed time measurement with the stopwatch while the watch is in the Stopwatch Mode or the Timekeeping Mode.

•The display range of the stopwatch is 23 hours, 59 minutes, 59.95 seconds.

•The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it.

•You can switch to another mode from the Stopwatch Mode only while the stopwatch is stopped and reset.

Indicator	00	10		• As you set the time, take care to ensure that the
hand
				left dial hand also indicates the correct 24-hour
			20
				timekeeping hour.
90			30	6. After the time setting is the way you want, press C.
				• This will cause the watch to beep and change to the
80		30	40	year setting mode.
70	60	50		7. Use Dand Bto change the year setting.
				• You can set the year within the range of 2001 to 2099.
Setting the year (10s digit)
				• Use B to move the indicator hand clockwise to the
		Bottom dial		value of the tens digit that you want to specify. To set
3	2 1 hand			2012, for example, move the hand to 10.
4		0		• Use D to rotate the bottom dial so the ones digit you
				want to specify is at the top (under the	mark). To
5		9		set 2012, for example, rotate the dial until 2 is at the
6		8		top as shown in the illustration.
	7			8. After the year setting is the way you want, press C.

Setting the year (1s digit)	• This will cause the watch to beep and change to the
	month setting mode.

To start an elapsed time operation while in the Stopwatch Mode

1.In the Timekeeping Mode, press D to enter the Stopwatch Mode.

2.In the Stopwatch Mode, press B to start elapsed time measurement.

3.Press Bto stop elapsed time measurement.

•You can restart and stop elapsed time measurement as many times as you like by pressing B.

•The bottom dial hand indicates 1/20 seconds during the first 60 seconds only, and then stops. When elapsed time measurement is stopped (by pressing B), the bottom dial hand will jump to the 1/20 second indication (which is kept internally).

4.Check the elapsed time.

•After you are finished measuring elapsed time, press Dto reset the stopwatch. The stopwatch will stop and reset even if you press Dwhile elapsed time measurement is in progress.

•To return to regular timekeeping, press Dwhile the stopwatch is reset.

1